Sandstrom 28A Solid Film Lubricant is a lacquer-like
coating containing molybdenum disulfide and corrosion
inhibiting pigments. This Air Drying material prevents
corrosion, galling, seizing and fretting. It is a low-friction
coating which exhibits long wear life when operated at
-320oF to +500oF under loads exceeding 100,000 psi.
Sandstrom 28A should be applied where baking with
the longer wearing, heat cured #099, Sandstrom 9A or
LC-300 is not desirable.
Excellent Corrosion Protection without the use of toxic
heavy metals and the use of non-HAP solvents are its
outstanding characteristics.
Once Sandstrom 28A has been applied to a properly
prepared surface and allowed to cure, it is virtually unaffected
by atmospheric and fretting corrosion, solvents, acids, oils
and degreasers. Sandstrom 28A can be applied to all
metallic and non-metallic surfaces by spray application.
Complete application instructions are on page two of this
Technical Information Guide.
沙尘暴28a固体润滑膜是一类漆二硫化钼和耐腐蚀涂层抑制色素。这空气干燥材料防止腐蚀，磨损和微动，抓住。这是一个低摩擦涂层具有长的耐磨寿命的操作时负荷超过100000 psi下+ 500of 320of。沙尘暴28a应适用于烘烤再穿，热固化# 099，沙尘暴9a或lc-300是不可取的。优良的防腐不使用有毒重金属和非HAP溶剂的使用它
突出特点。
一次沙尘暴28A已被应用到一个适当的制备的表面，使其固化，它几乎不受影响通过大气和微动腐蚀，溶剂，酸，油和脱脂剂。沙尘暴28a可以应用到所有金属和非金属表面的喷涂。
