As a 3-Phase a.c.50Hz H.V. switcher, GW1-24disconnector is suitable for rated 20kV power system for connecting or disconnecting circuit under certain voltage but no load condition.GW1-24 disconnector is fitted with CS8-1 type manual device.
Features of the product
This disconnector consists of 3 single pole disconnector, when mounting, pole and pole are connect by a pipe link rod. The distance between two pole center is 600mm. an operating device is fitted to operate the disconnector.
Each single pole disconnector consists of the base, rotating shaft, supporting insulator, pulling insulator, blade and contact. Supporting insulator are fixed on both ends of the base, and there are contacts fixed on the supporting insulator. A rotating shaft is in the middle of base and welded a toggle arm, connected with blade by pulling insulator. Either end of rotating shaft can be connected with pipe link rod open-close operation can be relized by manual operating device.
成套供应
隔离开关以三极一体出厂,，所配用的手动机构或电动机构也配套供应，并附有安装所需的联接附件。
订货须知
订货时应说明产品型号；额定电压；额定电流；配用机构型号（未注按CS8-5G供货），辅助极点数目（未注按4开4闭供货）；污秽等级。若用户有特殊的要求，请说明，本厂可协助解决。
